基于图像分析的数字化油墨预置技术

针对印刷数字化流程中的油墨预置技术,提出一种基于图像分析的油墨预置技术。选择RIP(Raster Image Processor)后的1bit TIFF图像为基础数据,提取各墨区对应的网点面积率;建立了网点面积率和墨键开度的数学模型,并采用最小二乘法求解模型参数,从而实现油墨预置。实验结果表明,所求取的油墨预置量可以较好地拟合原来的数据,采用该技术可以提高印刷工作效率,减少印刷浪费。     

Pain and dissociation in the cold pressor test: A study of hypnotic analgesia with "hidden reports" through automatic key pressing and automatic talking.

To test whether pain blocked by hypnotic analgesia may still be perceived at some level, 20 highly hypnotizable undergraduates participated in an experiment involving cold pressor pain in the normal condition and in hypnotically suggested analgesia. 3 reports were obtained reflecting felt pain within the hypnotic analgesia condition: the usual verbal report on a numerical scale, a manual report by "automatic key pressing," and a retrospective verbal report through "automatic talking." 9 Ss who were amnesic for both keypressing and automatic talking reported more pain in the automatic (hidden) reports than in their usual verbal reports. 8 of these 9, following release of amnesia, had a clear perception of 2 levels of awareness of the pain: the usual hypnotic experience of pain attenuated by analgesia suggestions, and a knowledge at another level of a more severe pain. In no case, however, did an S give a retrospective report of normal suffering at this "hidden" level. The hypnotically analgesic S may have reported no pain verbally because he was amnesic for it; when amnesia was removed he recalled the sensory pain, but without a suffering component, because suffering apparently did not occur. (24 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

加宽道路施工新技术研究

结合某公路改建工程,提出在加宽路段使用新技术———强夯法施工.为达到提高加宽部分填土路基承载力、减少新老路面不均匀沉降的目的,寻求适宜的施工参数及施工工艺.强夯在该工程的应用,取得了较为满意的经济效果,验证了强夯运用的正确性,为进一步拓宽强夯法的应用范围打下了良好的基础,同时也可为此新技术在公路工程中推广应用拉开序幕.     

腹板开孔轻钢龙骨复合墙体截面参数对传热的影响

对腹板开孔轻钢龙骨复合墙体截面参数如钢龙骨翼缘宽度、龙骨厚度、龙骨宽度和龙骨间距对墙体传热的影响和热桥问题进行模拟研究.结果表明:龙骨翼缘宽度对墙体传热系数影响不大,对墙体局部多维传热影响较大;龙骨宽度对墙体传热系数影响很大,龙骨宽度越小,热桥现象越严重;墙体传热系数随龙骨厚度的增加呈线性上升,龙骨截面越厚,热桥现象越突出;热桥占墙体总面积的比例随龙骨间距增加而减小,墙体的传热系数相应减小,而对钢龙骨的热桥效应影响甚微.     

一类带有非线性不确定参数的时滞系统的鲁棒控制

利用Lyapunov方法讨论了带有非线性不确定参数的时滞系统的鲁棒镇定问题.针对不确定性参数满足范数有界不确定性条件,给出了观测器状态反馈控制器设计方案,所得结果以线性矩阵不等式(LM I)的形式给出.     

465Q系列连杆珩磨工艺分析

由于各种汽车发动机连杆小头孔的尺寸、材料及表面要求存在差别,在珩磨加工时要根据具体型号发动机连杆进行珩磨工艺参数的选择.文中介绍连杆孔珩磨工艺参数的选择方法,确定465Q系列连杆小头孔的珩磨工艺参数,并针对珩磨加工出现的问题进行分析,找出影响工件质量的主要因素,对计算出的参数进行了修订.生产实践证明,连杆小头孔珩磨工艺参数选择得当可提高加工精度、降低成本、提高加工效率、延长零件的使用寿命.     

利用贝尔态的高效量子密钥分配协议

提出了一个建立在EPR关联之上的量子密钥分配协议,除了用作纠错部分之外,所有的量子位都对密钥生成有贡献,因此它是高效的,每个EPR对贡献密钥的两个位,所以本协议可以获得高容量,最后证明了该协议是安全的。     

Study on Solder Joint Reliability of Plastic Ball Grid Array Component Based on SMT Products Virtual Assembly Technology

1 Introduction As a new generational electronic circuit assembling technology,surface mount technology (SMT) has beendeveloped rapidlyinrecent years .The electronic circuit advanced assemblytechnology,whichis based on SMT,has advanced the manufacture process and manufacture systemof the SMTproductsto a newstage of flexible as-sembly andintegrated manufacture[1]. During the assembling of the SMTproducts ,the as sembly failure takesup more than 80 percent of the total failure ,the assemblyf…     

顶板隔水层关键层耦合作用规律研究

在煤矿开采过程中，如果覆岩裂隙扩展至贯穿隔水层，则会诱发地下水或地表水大量涌向采场，导致煤矿淹井事故．利用RFPA^2D-Flow软件建立了隔水层关键层耦合的采场推进模型，计算并分析了裂隙场的发育和分布，绘制了顶板水渗流量曲线．讨论了与裂隙发育密切相关的覆岩支承压力与中间岩层厚度、关键层厚度及破断闻的关系．结果表明：关键层未破断时，中问岩层厚度对隔水层裂隙发育作用不明显；厚关键层对隔水层能起较好的保护作用．     

4G移动通信系统及其与3G系统的比较研究

首先介绍了第四代移动通信系统(4G)的定义、技术特征,探讨了4G与超3G、WiMax的关系,然后对4G和3G的体系结构、系统参数、关键技术、移动性管理和安全策略等进行了比较研究,对4G的研究和建设具有一定的参考价值。